1 |
Duty cycleThis term generally refers to the percentage of time a machine or piece of equipment can be in operation in relation to the time it must remain out of operation. For instance, a duty cycle of 100 perc [..]
|
2 |
Duty cycleIn an ideal pulse train, i.e., one having rectangular pulses, the ratio of the pulse duration to the pulse period. Note: For example, the duty cycle is 0.25 for a pulse train in which the pulse duration is 1 s and the pulse period is 4 s. 2. The ratio of (a) the sum of all pulse durations during a specified period of continuous operation to (b) the [..]
|
3 |
Duty cycle(1) In print and copy terminology, duty cycle refers to the number of copies or prints that the device can reliably produce on a monthly basis. Exceeding the duty cycle number on a regular basis can l [..]
|
4 |
Duty cycleThe ratio of operating time versus total cycle time of a motor. A motor has a continuous duty rating if it continues to operate for an indefinite amount of time and its normal operating temperature remains within the temperature limits of its insulation system. A motor has an intermittent duty rating if it never reaches a steady temperature, but is [..]
|
5 |
Duty cycleSpecified sequence of operating conditions.
|
6 |
Duty cycleThe relationship between the operating and rest time. A motor which can continue to operate within the temperature limits of its insulation system, after it has reached normal operating (equilibrium) [..]
|
7 |
Duty cycleThis refers to the percentage of time in any ten minutes that the plasma arc can be cutting. It is usually 100% on mechanised plasma cutting systems.
|
8 |
Duty cycleThe duty cycle is the amount of time a signal is on or a system is operated within a given period. The duty cycle can be defined as a percentage or as a ratio. For instance if a signal is on for 1 sec [..]
|
9 |
Duty cycleIn a circuit, the ratio of off time to on time.
|
10 |
Duty cycleThe ratio of on-time and off-time
|
11 |
Duty cycleThe working requirements of a crane or hoist as defined by HMI, CMAA or FEM classifications.
|
12 |
Duty cycleThe load current or power a battery is expected to supply for specified time periods.
|
13 |
Duty cycle The ratio of pulse width to period, indicates the percentage of time a pulse is present during a cycle.
|
14 |
Duty cycleRated duty cycle is the percentage of a 10 minute period a welding machine must deliver its rated electrical current load.
|
15 |
Duty cycleis the percentage of time on versus time off or duty cycle = Ton/Toff.
|
16 |
Duty cycle
|
17 |
Duty cycleThe relationship between the operating time and the resting time of an electric motor. Motor ratings according to duty are: Continuous duty, the operation of loads for over one hour. Intermittent duty, the operation during alternate periods of load and rest. Intermittent duty is usually expressed as 5 minutes, 30 minutes or one hour.
|
18 |
Duty cycle(DC) A number indicating the amount of time that some signal is at full power. In the context of an ECU, duty cycle is used to describe the amount of time that the injectors are on, and to describe t [..]
|
19 |
Duty cycleAmount of time that a compressor can operate at full load over a thirty minute time period.
|
20 |
Duty cycleThe duty cycle (work cycle) of a compressor is a measurement of the compressors work time compared to its required rest time. The percentage given represents the working portion of this cycle. This required rest time of some compressors is due to heat produced during the duty cycle. The length of time of the cycle varies by compressor.
|
21 |
Duty cycleFor a repetitive cycle, the ratio of "on" time to total cycle time used to determine a motor's rms current and torque/force.
|
22 |
Duty cycleThe ratio of high-time to low-time of a square wave. In a transmitter, ratio of time on to time off. In an ideal pulse train, i.e., one having rectangular pulses, the ratio of the pulse duration to th [..]
|
<< Duplex scanner | Dynamic thresholding >> |